Personal tools

Sections

Optical Quality



An optical quality test

Even binoculars with large objective lenses can have poor light-gathering ability if the optics are poor. Examine the edges of the exit pupil to see if it forms a complete, bright circle (above, left) or if it is partially shaded in gray (above, right). If only the center of the exit pupil is bright, then inferior optics are blocking some of the light, counteracting the advantages of the large objective lenses.

Coated optics

Light entering the objective lens passes through up to eight pieces of optical glass in each barrel. At each glass surface some light is reflected backward rather than passing through the prisms and lenses. The optics of well-made binoculars are coated with non-reflective film that helps deliver more than 90% of the light gathered by the objective lenses. Without non-reflective coating, binoculars may lose as much as 60% of that light.

Although you should never look at the sun directly through binoculars, coated optics also help when you're looking at backlit subjects. Within uncoated binoculars, reflected light causes annoying glare.

Always choose binoculars with "fully coated" optics. Beware that, although most manufacturers coat exterior lenses, the interior optics of some inexpensive binoculars may be uncoated, causing a significant loss of light. Also note that the quality of coating varies; price makes a difference, with more expensive binoculars having better quality optical coating.

Resolution

The quality of the optical glass used in binocular manufacture affects resolution (the ability to separate objects visually) and image sharpness. High quality optical glass is extremely expensive, and each lens and prism must be professionally ground and mounted with expert precision. Top-of-the-line binoculars usually have excellent optics, producing images that are crisp across the entire field of view. Manufacturers of lesser products cut corners, often by using cheaper glass and looser quality control.

To check the center-to-edge resolution of a pair of binoculars, focus them on a map or newspaper tacked to a wall. Stand back about 25 feet and see if you  can read the print at both the center and edge of the field of view.