How to make a birdfeeder

By Jason
Chester School
Wooster, OH
Mrs. Lang's class
Grade 5

You will need:

• wood
• two roof pieces 4 3/4" x 12 3/4"
• sides 7 1/2" x 4"
• bottom of feeder 1' x 5 1/2"
• wood on bottom corners 7 1/2" x 1 1/2"
• plexiglass 10 1/2" x 7 3/4"
• a screwdriver
• a 7/64" drill bit
• screws and nails
• plexiglass

What to do:

First you need to cut the wood.
Second, you decide you you're going to assemble it.
Third, you make the holes for the screws and nails.
Then, you start to drill the screws for the sides.
After that, you drill holes on the sides at the top for the roof.
Then, you drill the screws in the holes.
Next, you screw the two pieces of wood at the end of the bottom board together.
Finally, you smooth the four pieces of wood for the perches, and screw them on.
(HELPFUL HINT: The feeder should be 13" long and 1' high).

GO BACK